The molecular weights of the polymers increased linearly with the monomer conversion and the molecular weight distributions were relatively narrow (PDI < 1.2). It is confirmed Apoptosis inhibitor by chain extension reaction that the polymer prepared via RAFT polymerization can be used as a macro-RAFT agent. The structure of both polymers was characterized and confirmed by size-exclusion chromatogra-phy and (1)H-NMR techniques. Ultrafine microfibers were prepared by electrospinning of poly(N-vinylphthalimide) in DMF solution. The effects of electrospinning process parameters such as voltage, tip-to-collector distance, and solution concentration on the morphology and the

average size of the electrospun fibers were studied. To evaluate the fiber diameters, scanning electron microscope micrographs of the microfibers were performed. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 117: 1005-1012, PCI-34051 2010″
“Electron spin resonance (ESR) results are presented on the influence of in situ ultrasound treatment (UST) during implantation at 300 K of Si+ ions into thermal SiO2 on (100)Si before and after subsequent high-temperature (T) annealing (1100 degrees C) intended to promote the formation of embedded Si nanoparticles. The as-implanted state exhibits high densities

of three prominent types of point defects, including the SiO2-specific S and E-gamma’ O-vacancy type centers, and an unknown broad (approximate to 20 G) signal at g approximate to 2.0026 denoted IS. The high-intensity S signal shows demagnetization shape effects, pointing to a distribution of high local density of defects over a thin layer. UST is observed to effectuate a drastic reduction in S and E-gamma’ centers, and elimination of IS beyond detection. This reveals a strong healing influence of in situ transferred ultrasound (US) energy on implantation-induced damage, here quantified and identified on atomic level in terms of mainly

intrinsic paramagnetic point defects elimination, viz., Frenkel pair elimination, while all three initial signals disappear. Other types of defects surface after annealing of the non-US treated sample, including the see more SiO2-specific EX defect signal and P-b-type Si/SiO2 interface centers, the appearance of the latter providing direct ESR evidence for crystallization of the excess Si nanoparticles. The influence of the UST healing effect is kept up after subsequent annealing, now resulting in the absence of virtually all ESR-active centers. The drop in P-b-type centers below the detection level in the UST annealed sample indicates improvement of the nanocrystalline-Si/SiO2 interface quality. The combination of UST with high-T annealing emerges as a highly efficient means to eradicate ion implantation damage in terms of intrinsic point defects. (C) 2010 American Institute of Physics. [doi:10.1063/1.